PenMount Touchscreen 6000 - Install for Windows 2000;XP;7;8 Systems; Supported Systems; Installation Options

Chapter 3 Installing Drivers for 6000 Boards
21
3.2. Install for Windows 2000/XP/7/8 Systems
3.2.1. Supported Systems
The PenMount Windows Universal Driver supports the following Windows operating
systems.
Operating System
Windows Workstation
Windows 2000
Windows XP
Windows XP Tablet PC Edition
Windows Vista
Windows 7
Windows 8
Windows Server
Windows Server 2003
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Embedded
Windows XP Embedded
Windows Embedded Standard 2009
Windows Embedded Standard 7
Windows Embedded Standard 8
3.2.2. Installation Options
Setup.ini
The options in the setup.ini file
Section
Option
Value
Description
Setup
Name
---
Reserved, please do not change the value
Driver
1
Install the device driver files
0
Do not install the device driver files
Utility
1
Install the utility files
0
Do not install the utility files
Gesture
1
Install the gesture recognizer files
0
Do not install the gesture recognizer files
Option
ShowInfo
1
Show the PenMount contact information in the
“PenMount Control Panel”
0
Do not show the PenMount contact information
in the “PenMount Control Panel”
Version
Major
---
Reserved, please do not change the value
Minor
---
Reserved, please do not change the value
Build
---
Reserved, please do not change the value
QFE
---
Reserved, please do not change the value
Driver\Install.ini
The options in the install.ini file affects the behavior of the PenMount device driver
installer. The following table lists the supported options in install.ini, and the values in blue
color are the default settings.
.