Installer Manual 255-LOGIX 740-760 - Maintenance
58 / 76 Ref. MKT-IM-001 / C - 08.10.2019
f
9.4.7. Valve from tank disassembly
No. Operation
Tip
Depending on the maintenance required, it may be useful to disassemble the valve from the
tank in order to have easier access.
A Unlock the cover (1) from the slide clips (2) (one on each side of the valve).
B Lift the cover (1).
C
Using a Phillips screwdriver unscrew the screw (7) from the locking bar (6), so that the
locking bar (6) can be slid out of its position.
D
You can now lift the top of the valve body (3) from the tank adapter (5), so as to perform all
required maintenance operations with the upper valve body (3) part on a workbench.
Take care with the seals (4) on the valve body bosses.
To Next Page
Loading...
