Pentair Evolio 255 Series - Covers Removal (Softener and Valve)

Installer manual Evolio 255 740-760 - Maintenance
62 / 90 Ref. MKT-IM-037 / D - 25.10.2021
8.5.2 Covers removal (softener and valve)
CAUTION
Do not pull on the cables.
Release the connectors from components by pressing on their locking clips.
1. Acceding from behind the softener, disconnect the controller (1).
2. Remove the softener cover (2).
3. Unlock the valve cover (3) from the slide clips (4) (one on each side of the valve).
4. Remove the valve cover (3).
5. Reverse above procedure steps to rebuild. See Evolio 255 controller connection [
→
Page37].