Pentair Evolio 255 Series - 5 Programming; Display

Installer manual Evolio 255 740-760 - Programming
38 / 90 Ref. MKT-IM-037 / D - 25.10.2021
5 Programming
Info
Menus are displayed in a defined and incremental order.
5.1 Display
time/day26
25 regeneration time
capacity22
hardness21
24 salt amount
1 Hourglass Displayed when the motor is running. The camshaft should be turning.
2 Cursor These cursors appear next to the item that is currently displayed.
3 Days of the week Displayed days of the week. The flag below the day appears when that
day has been programmed as a day the system should regenerate (used
with 7-day timer programming).
4 Locked/unlocked
indicator
This symbol is displayed in basic programming when the current
parameter is locked-out (lock/unlock parameter in advanced
programming menu, see Advanced programming [
→
Page45])
5 Colon Colon flashes as part of the time display.
It also indicates normal operation.
6 Indicator Calendar override icon
7 "PM" Indicates that the time displayed is between 12:00 noon and 12:00
midnight.
"PM" indicator is not used if the clock mode is set to 24-hour (there is no
PM indicator).
8 "MIN" Indicates that the value entered/displayed is in minute increments.