Pentair Evolio 255 Series - Commands; Quick Program Guide

Installer manual Evolio 255 740-760 - Programming
40 / 90 Ref. MKT-IM-037 / D - 25.10.2021
5.2 Commands
time/day
regeneration time
capacity
hardness
salt amount
1 Display Used to show information, see Display [
→
Page38].
2 LED Warning for low salt level (if chlorine generator is installed).
3
Down arrow
Used to scroll down in a parameter list or to decrement a parameter
value.
4
Set
Used to confirm a setting and save it in the controller's non volatile
memory.
5 Up arrow Used to scroll up in a menu list or to increment a parameter value.
6
Regenerate
Used to command the controller to regenerate.
Also used to change the lock mode.
5.3 Quick program guide
Value to enter for model
Press Initial
display
Evolio 255
10
Evolio 255
15
Range Parameter
UP and DOWN arrow to scroll
through values, press SET to
confirm.
--- 10 15 5 - 80 Volume of
resin in L
Press SET to select, display blink,
press UP/DOWN arrows to
program actual time of day, press
SET to confirm.
--:-- Set up actual time of
day.
00:00
23:59
Time of day