27
SunTouch
®
Control System Installation and User’s Guide
Generic
No special Logic. Simple On/Off control of a circuit with all the programmable capa-
bilities.
Solar
Works with automatic pool cleaner pumps or cleaner valve actuator. It does the
following:
- Forces the filter pump on 5 minutes before the cleaner pump switches on.
- Switch the cleaner off when the spa is on.
- Switch the cleaner off for 5 minutes when the solar heating begins.
Floor Cleaner
This setting moves a 3-way valve every 20 minutes alternating flow between two
cleaner system valves that feed the pop-up heads.
Spillway
For pool/spa combinations where the spa is raised above the pool. This setting
moves the return valve so that the filter pump pulls the water from the pool and re-
turns it to the spa, creating a water fall effect. Automatic pool cleaners are turned off
when this feature is turned on.
Circuit Functions Menu (10/14) (Continued)
Preset Circuit Functions
To Next Page
Loading...
