Pentair SunTouch - Suntouch System Overview

44
SunTouch
®
Control System Installation and User’s Guide
SunTouch
®
Control System Overview
•Pumps
Filter, Cleaner, Spa Jet -
1.5 HP 120 VAC
3 HP 277 VAC
20 FLA/120 LRA,120 VAC
17 FLA/102 LRA, 277 VAC
•Pool/Spa Lights
1.5 KW 120 VAC Tungsten
4.8 KW 240 VAC Tungsten
20 AMP, 277 VAC Ballast
• Pool/Spa Valve
Suction and return.
24 VAC valve actuator, shared
equipment only
• Valve actuators
Valve A (intake), Valve B (return),
Valve C (Solar)
• Heat Source
Gas, Electric and Solar
• Relays (3 maximum installed in
power center)
25 AMP, 277 VAC
Optional equipment
• IntelliChlor
®
Salt Chlorine
Generator (SCG)
• IC20P/N520554/520556
• IC40P/N520555/520556
• PowerCenter
P/N 520556
• IntelliFlo
®
VS Pump (P/N 011013)
IntelliFlo
®
VF Pump (P/N 011012)
(see page 30)
Temperature Sensors
(Water, Air and Solar)
SunTouch
®
Control System
enclosure (with two resettable
circuit breakers
(18 VAC and 24 VAC).
Electrical Ratings:
Input:
120/240 VAC, 60/50 Hz,
820/410 mA maximum.
Output:
120 VAC, 20 FLA/120 LRA,
1.5 HP.
277 VAC, 17 FLA/120 LRA,
3.0 HP.
QuickTouch
®
(QT4)
Wireless Remote kit
(P/N 520148)
(Optional)