Pentair SunTouch - Wiring Intellilchlor (SCG) and Standard Pump to Suntouch

76
SunTouch
®
Control System Installation and User’s Guide
TO AUX (FILTER PUMP) SOCKET
(ON SUNTOUCH® CONTROL SYSTEM CIRCUIT BOARD)
FILTER PUMP RELAY
(IN POWER CENTER)
IntellilChlor® Salt Chlorine
Generator
Communication Cable
IntelliChlor® SCG Power Center
(wired for 120 or 240 VAC)
2-SPD Pump
(wired for 120 or 240 VAC)
TO AUX SOCKET ON
CIRCUIT BOARD
TO PUMP SOCKET
ON CIRCUIT BOARD
120 VAC
120 VAC
2-SPEED PUMP OPTION
TO PUMP MOTOR TERMINALS
LOAD SIDE (VOLTAGE)
LOAD SIDE
LOAD SIDE
LINE SIDE
LINE SIDE
Source voltage:
120 VAC or 240 VAC
to circuit breaker sub-panel
Wiring IntellilChlor
®
(SCG) and Standard Pump to SunTouch
®
Control System
The following diagram shows how to connect the IntelliChlor
®
(SCG), a standard pool lter pump to the
SunTouch
®
Control System Power Center.