60
3
Basic Operations
3
Press the four-way controller
(2).
The Drive Mode options screen
appears.
4
Use the four-way controller
(45) to select h or i.
The self-timer lamp will blink to let you
know that the camera is in remote
control wait status.
5
Press the 4 button twice.
The camera is ready to take pictures.
6
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when the subject is in focus.
• You cannot focus with the remote control unit in default settings. Focus on
the subject first before operating with the remote control. You can set [AF in
remote control] to [On] in the custom function. (p.100)
• When using the Remote Control Unit, flash does not pop up automatically
even when set to B (Auto discharge). Pop up the flash manually
beforehand. (p.51)
OK
OK
Drive Mode
OK
Drive Mode
Remote Control Unit
Remote Control Unit
To Next Page
Loading...
Need help?
General
