Pentax MZ-S Service Manual

27640 -31/34-
***** MAIN MENU *****
***** < B GROUP > *****
***** CCD POSITION *****
[ 4 ] CCD POSITION CHECK [ 5 ] CCD FOCUS ADJUSTMENT
***** CCD FOCUS ADJUSTMENT *****
(TYPE 2)
SET 2M CHART.
MATCH AF FRAME IN CAMERA WITH THE CHART.
SET 2m MASTER LENS.
SET FOCUS-MODE SW OF CAMERA TO MF.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** CCD POSITION CHECK *****
MOUNT F ZOOM LENS 35-80 (41280) ONTO CAMERA.
SET FOCUS-MODE SW OF CAMERA TO MF.
TURN FOCUSING RING OF LENS
TO MINIMUM DISTANCE 0.4M (1.3FT).
SET ZOOMING RING OF LENS TO TELE END (80MM).
SET LIGHT SOURCE TO LV 12.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** SELECT MASTER LENS TYPE *****
TYPE 1 ( INFINITIVE FOCUS ) ---- [ 1 ]
TYPE 2 ( 2m FOCUS ) ---- [ 2 ]
***** CCD FOCUS ADJUSTMENTS *****
ADJUSTED WITHIN TOLERANCE.
FOCUS DATA= **
=
*
=
***** CCD FOCUS ADJUSTMENT *****
(TYPE 1)
SET CHART IN COLLIMATOR OF OPTICAL REGULATOR
TO VERTICAL
POSITION.
MATCH CENTER SPOT
AF FRAME IN CAMERA WITH THE CHART.
SET MASTER LENS TO ZERO POSITION.
SET FOCUS-MODE SW OF CAMERA TO MF.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** CCD POSITION CHECK *****
[IL]
[OL]

Pentax MZ-S Specifications

General

Brand	Pentax
Model	MZ-S
Category	Digital Camera
Language	English