Pentax MZ-S - USING METERED MANUAL MODE

27640 -32/34-
***** MAIN MENU *****
***** < B GROUP > *****
[ 2 ] ZERO POSITION AND AGC LEVEL ADJUSTMENTS [ 3 ] CCD ADJUSTMENT [ 4 ]AF C ADJUSTMENT
[ 5 ]
AF ADJUSTMENT
***** ZERO POSITION AND AGC LEVEL ADJUSTMENT *****
MOUNT FOCUS MASTER LENS ONTO CAMERA.
SET LIGHT SOURCE TO LV 12.
SET FOCUS-MODE SAW OF CAMERA TO MF.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** CCD ADJUSTMENT *****
MOUNT FOCUS MASTER LENS ONTO CAMERA.
SET LIGHT SOURCE TO LV 12.
SET FOCUS-MODE SAW OF CAMERA TO MF.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** AF C ADJUSTMENT *****
CHECK ROOM TEMPERATURE
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** BIT CHECKING *****
INPUT ROOM TEMPERATURE
<C> ---> PRESS KEY [ 1 ]
<F> ---> PRESS KEY [ 2 ]
INPUT ROOM TEMPERATURE <C> ? **
***** SELECT MASTER LENS TYPE *****
TYPE 1 ( INFINITIVE FOCUS ) ---- [ 1 ]
TYPE 2 ( 2M FOCUS TYPE ) ---- [ 2 ]
***** AF ADJUSTMENT *****
(TYPE 1)
SET CHART IN COLLIMATOR OF OPTICAL REGULATOR
TO *** POSITION.
MATCH CENTER *** AF FRAME IN CAMERA WITH THE CHART.
SET MASTER LENS TO ZERO POSITION.
SET FOCUS-MODE SW OF CAMERA TO MF.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].
***** AF ADJUSTMENT *****
(TYPE 2)
SET 2m CHART.
MATCH AF FRAME IN CAMERA WITH THE CHART.
SET 2m MASTER LENS.
SET FOCUS-MODE SW OF CAMERA TO MF.
AFTER CONFIRMING ABOVE, PRESS KEY [ Y ].
WHEN YOU RETURN TO FRONT MENU, PRESS KEY [ N ].