Pentax Optio W80 - Page 102

101
3
Taking Pictures
3 Press the 4 button.
The camera enters the F mode and the message [Set shift direction]
is displayed.
4 Use the four-way controller (45)
to choose the direction in which
the images will be joined.
The screen for taking the first frame is
displayed.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.73).
5 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
6 Press the shutter release button fully.
The screen for taking the second frame is displayed after you take the
first frame.
If you select right (5) in step 4:
The right edge of the first frame appears in semi-transparent form on
the left edge of the display.
If you select left (4) in step 4:
The left edge of the first frame appears in semi-transparent form on
the right edge of the display.
7 Take the second frame.
Move the camera so that the semi-
transparent image and the actual view
overlap and press the shutter release
button.
Set shift direction
Set shift direction
32
3 2
32
14
1 4
:25
: 2 5
14:25
1
07/07/2009
0 7 / 0 7 / 2 0 0 9
07/07/2009
1 2
SHUTTER
OK
Exit
Exit
2nd Frame
2nd Frame
e_kb485.book Page 101 Friday, July 3, 2009 9:18 AM