132
3
Taking Pictures
6
Use the four-way controller (23)
to select a key you want to assign
a function to.
7
Press the four-way controller (5).
A pull-down menu appears.
8
Use the four-way controller (23)
to select the function you want to
register.
9
Press the 4 button.
The setting is saved.
10
Press the 3 button twice.
The camera returns to capture mode.
The initial settings for Fn settings
This function is activated only when you assign the [Fn Setting] to the
Green button.
You can assign only one function to each key.
Still picture mode Movie mode
Initial setting (2) EV Compensation (2) Movie SR
(3) Recorded Pixels (3) EV Compensation
(4) Quality Level (4) Recorded Pixels
(5) White Balance (5) White Balance
Recorded Pixels
EV Compensation
Green Button
Q
MENU
Quality Level
White Balance
WB
+
+
+
+
Fn Setting
Green Button
Q
MENU
Cancel
Quality Level
White Balance
Focusing Area
Recorded Pixels
Sensitivity
+
+
+
+
WB
AF
EV Compensation
OK
OK
To Next Page
Loading...
