207
7
Settings
1
Use the four-way controller (23) to select [Alarm] on
the [W Setting] menu.
Check that [Alarm] is set to O (On).
2
Press the four-way controller (5).
The Alarm screen appears.
Check the alarm frequency and time.
3
Press the 3 button twice.
The camera returns to A mode or Q mode.
The Clock mode screen appears and the alarm
rings for one minute when the set time is
reached while the camera is turned off.
You can stop the alarm by pressing any button
on the camera while the alarm is ringing.
Checking the Alarm
Turning the Alarm Off
• The alarm will not ring if the camera is on when the set time is reached.
• Even if an alarm is set, the alarm will not ring while interval shooting is
being performed.
Alarm
14:14
MENU
Alarm Once
Time
Cancel
14:25
Settings complete
e_kb485.book Page 207 Friday, July 3, 2009 9:18 AM
To Next Page
Loading...
