91
3
Taking Pictures
6
Press the 4 button.
The frame appears on the display.
When the camera recognizes a person’s
face, the Face Recognition function is
activated and the face recognition frame
appears (p.73).
7
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
8
Press the shutter release button fully.
The picture is taken.
•In N mode, the number of recorded pixels is fixed at h
(2048×1536).
• At shipment, the camera includes 3 default frames and 87 optional
frames built-in. (The CD-ROM supplied with the camera contains a
total of 90 frames, including the default frames.)
Optional Frames
The optional frames are stored in the built-in memory in the Optio W80. If the
optional frames are deleted from the built-in memory using a computer, they can
be recovered by copying them from the CD-ROM (S-SW87) provided (p.182).
Adding a Frame to a captured image 1p.180
38
14:25
0 7 / 0 7 / 2 0 0 907/07/2009
e_kb485.book Page 91 Friday, July 3, 2009 9:18 AM
To Next Page
Loading...
