USER MANUAL
Peplink Balance Series
http://www.peplink.com - 39 - Copyright © 2010 Peplink
Important Note
Starting from firmware version 5.0, Drop-in mode can be configured not only on WAN1, but on any WAN ports.
Please be noted that still only one WAN port can be configured in Drop-in mode.
If you have selected the LAN Bypass port (which is currently only available on WAN1 of Balance 390/1350 and
WAN5 of Balance 580) as the WAN for Drop-in Mode, High Availability feature will be DISABLED automatically.
Tip
Want to know more about Drop-in mode? Visit our YouTube Channel for video tutorials!
http://www.youtube.com/PeplinkChannel#p/u/9/xHTLcCXsqTc
To Next Page
Loading...
Need help?
General
