peplink 210 User Manual

USER MANUAL
Peplink Balance Series
http://www.peplink.com - 94 - Copyright © 2010 Peplink
High Availability Settings
High Availability
Checking this box specifies that the Peplink Balance unit is part of a High Availability
configuration.
Group Number
This setting specifies a number that identifies a pair of Peplink Balance units that operate in
a High Availability configuration.
The two Peplink Balance units in the pair must have the same Group Number value.
Preferred Role
This setting specifies whether the Peplink Balance unit operates in Master or Slave mode.
Click the corresponding radio button to set the role of the unit.
One of the units in the pair must be configured as the Master and the other unit must be
configured as the Slave
Configuration
Sync.
This option is displayed when Slave mode is selected in Preferred Role.
If this option is enabled and the Master Serial Number entered matches with the actual
master unit's, the master unit will automatically transfer the configuration to this
unit. Please make sure the LAN IP Address and Subnet Mask fields are set correctly in
the LAN Settings page.
You can refer to the Event Log for the configuration synchronization status.
Master Serial
Number
If the box Configuration Sync. is checked, serial number of the Master unit is required to
be entered here.
Virtual IP
The setting specifies the LAN IP address on which the active Peplink Balance listens.
The value of Virtual IP represents a LAN IP address that is shared among the Master and
Slave units; however, at any time, only one of the two units will listen on the IP address.
If the WAN is configured in NAT mode, Default Gateway of the clients on the LAN should
be set to the virtual IP. These configurations are not required when the WAN is configured
in Drop-in mode.
LAN
Administration IP
This setting specifies a LAN IP address to be used for accessing administration
functionality.
This address should be unique within the LAN.
Subnet Mask
This setting specifies the subnet mask of the LAN.

peplink 210 Specifications

General

Brand	peplink
Model	210
Category	Wireless Router
Language	English