Date of issue 11/30/07 805639
HART Loop Converter KFD2-HLC-(Ex)1.D(.**)
Editing device data: Service
34
8.6 Service
The following illustration shows the service parameter menus. Items from the lowest menu level are
outlined in bold.
Reset: Pressing the OK key when On Reset is flashing resets all settings on the HLC to default (see
section 8.7). Any entries that you have made in parameterization mode are lost.
Service —— Language —— ENG (English)
DE (German)
Password (8.1.3) —— On password
OFF password
Reset (see below) —— On reset
OFF reset
To Next Page
Loading...
Need help?
General
