Date of issue 11/30/07 805639
35
HART Loop Converter KFD2-HLC-(Ex)1.D(.**)
Editing device data: Default settings
8.7 Default settings
Rel1 and Rel2 are available with the KFD2-HLC-(Ex)1.D.2W and KFD2-HLC-(Ex)1.D.4S, Rel3 and
Rel4 are available with the KFD2-HLC-(Ex)1.D.4S.
Menu Parameter Default setting Separate value
Unit PV → type auto
SV → type auto
TV → type auto
QV → type auto
HARTcom Mode primary
TimeOut 10 sec
ShortAddress 0
LocateMethod search
Output Iout1 Assignment disabled
Characteristic 4 - 20 NE43
Start value 0.000
End value 100.0
Error current down
Output Iout2 Assignment disabled
Characteristic 4 - 20 NE43
Start value 0.000
End value 100.0
Error current down
Output Iout3 Assignment disabled
Characteristic 4 - 20 NE43
Start value 0.000
End value 100.0
To Next Page
Loading...
Need help?
General
