Pepperl+Fuchs KFD2-HLC-Ex1.D - Page 39

Date of issue 11/30/07 805639
37
HART Loop Converter KFD2-HLC-(Ex)1.D(.**)
Editing device data: Default settings
Restart inhibit OFF restart inhibit
Response delay 0 sec
Fault indication not selected
Output Rel4 Trip value On (= selected)
Assignment disabled
Min/Max (= switching direction) Min
Trip point 80.00
Hysteresis 10.00
Switching mode passive
Restart inhibit OFF restart inhibit
Response delay 0 sec
Fault indication not selected
Service Language ENG
Password OFF PASS
Menu Parameter Default setting Separate value