VisuNet FLX System
Maintenance, Cleaning and Disposal
2023-11
109
8.3 Exchanging the BPC3200-* or DMU3200-*
Procedure
1. Open the AG-3200-* housing. See chapter 4.5 Open the Housing. After de-energizing (see
above), open the terminal compartment of the TCU/PCU/DMU.
2. Please refer to the VisuNet FLX Panel Mount manual chapter 7.1 for detailed information. From
step 2 you will find all relevant information.
8.4 Cleaning
How often it becomes necessary to clean the system depends on the operating and environ-
mental conditions. If necessary, follow the on-site cleaning plan.
Clean and maintain your system regularly.
Cleaning agents and disinfectants
Refer to the Panel Mount manual for further information.
To Next Page
