70 . DSC 6000 Installation and Hardware Guide
Safety Precautions for the AS 8000
The safety precautions to be followed when using the AS 8000 autosampler are the same as
those for the parent instrument: STA 6000, DSC 4000, DSC 6000, or the TGA 4000. In
addition, the following two precautions should be kept in mind:
WARNING
AVERTISSEMENT
To remove the furnace lid(s) of the parent instrument,
always use tweezers. The furnace lid(s) might be hot
.
Pour retirer le (s) couvercle (s) du four de l'instrument
parent, utilisez toujours une pince à épiler. Le (s) couvercle
(s) du four pourrait être chaud
.
CAUTION
ATTENTION
Before powering up the parent instrument, make sure that the AS 8000
is properly attached to the base plate on the parent instrument.
Avant d'allumer l'instrument parent, assurez-vous que l'AS 8000
attaché à la plaque de base de l'instrument parent.
To Next Page
Loading...
