86 . DSC 6000 Installation and Hardware Guide
AS 8000 Autosampler Maintenance
The exterior surfaces of the AS 8000 may be cleaned with a soft cloth, dampened with a mild
detergent and water solution.
The bushings of the gripper fingers should also be kept clean. Use a cotton swab dampened
with a mild detergent and water solution to carefully wipe them clean. Use the same method
to clean the two sample trays.
Cleaning and Decontamination
Before using any cleaning or decontamination methods except those specified by
PerkinElmer, you should check with PerkinElmer that the proposed method will not damage
the equipment.
WARNING
AVERTISSEMENT
There are no user-serviceable parts inside the autosampler.
Refer all servicing to a qualified PerkinElmer Instruments
service engineer.
Il n'y a pas de pièces réparables par l'utilisateur à l'intérieur
de l'échantillonneur automatique. Renvoyez tous les
services à un ingénieur de service qualifié PerkinElmer
Instruments.
To Next Page
Loading...
Need help?
General
