Installing your Lambda Spectrometer . 39
8. Click Finish.
If you selected Full Installation, the UV WinLab installer will run. After a few seconds,
the UV WinLab Welcome page is displayed. Go to Step 9.
OR
If you selected UV WinLab Data Processor and Viewer Only, the installation is now
complete.
UV WinLab DPV is now ready to be used. You do not need to restart your computer.
9. Click Next.
If your PC does not meet any of the requirements you will be informed of the problem
and will need to correct it before the installation can be performed. Otherwise, the UV
WinLab License Agreement will be displayed.
To Next Page
Loading...
