PerkinElmer Lambda Series User Manual

48 . High-Performance Lambda Spectrometers Getting Started Guide
14. Click Next.
The Example Methods page is displayed.
15. Select the group(s) of Example Methods that you would like to install.
The groups include: Color, Materials, Optics and Solar Reflectance.
16. Click Next.
The Finish page displays all the selected settings.
17. If all the settings are correct, click Finish to close the wizard and add the instrument.
The Wizard closes, a confirmation message that the instrument has been successfully
installed is displayed, and the instrument is displayed in the UV WinLab Explorer.
OR
Click Back to return to the previous page(s) and amend the settings as required.

PerkinElmer Lambda Series Specifications

General

Category	UV Vis Spectrophotometer
Spectral Bandwidth	0.5, 1, 2, 4 nm
Data Interval	1, 2, 5 nm
Slit Width	0.5, 1, 2, 4 nm (selectable)
Light Source	Deuterium and Tungsten Halogen lamps
Display	LCD
Interface	USB, RS-232
Power Requirements	100 - 240 VAC, 50/60 Hz
Wavelength Range	190-1100 nm