Perkins 4008 - Diesel Engine Specifications (Continued); Weight and Electrical System Details

DIESEL ENGINE DATA
10 4006/8 Diesel, May 1998
TYPICAL DRY WEIGHT
HOLDING DOWN BOLT HOLES
ELECTRICAL SYSTEM
4006 4008
Dry weight (engine) 2295 kg 4006TG 3120 kg 4008TAG
2320 kg 4006TAG1/2 3250 kg 4008TAG1/2
2340 kg 4006TWG 3325 kg 4008TWG2
2420 kg 4006TEG
2400 kg 4006TAG3
2340 kg 4006TWG3
Dry weight (engine and tropical radiator) 2636 kg 4006TG 3730 kg 4008TAG
2761 kg 4006TAG1/2 4360 kg 4008TAG1/2
2477 kg 4006TWG1/2
3010 kg 4006TAG3
2790 kg 4006TWG3
Dry weight (engine and heat exchanger) 2560 kg 4006TEG 3462 kg 4008TWG2
Bolt size (engine feet) 20 mm
No. off 6
Voltage 24
Alternator type PRESTOLITE (BUTEC) A3024 with internal regulator
Alternator output (amps) 30 at a stabilised output of 28 volts
Starter motor type
PRESTOLITE/BUTEC
MS1/105
MS7/3A
No. of teeth (gear ring) 190
No. of teeth (starter motor) 12
Battery capacity cold cranking amps
to IEC Standard at 0°C (32°F)
540 (each battery) 600 (each battery)
Battery (lead acid) 24 V (2 x 12V) Total 143 Ah (2 x 12V) Total 178 Ah