© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
107
DEVICE OPERATION: CONFIGURING VIDEO SETTINGS
What do I do if video is not being encoded?
?
Ensure that the camera is powered and all cables are connected securely to the correct connectors.
1
If there are no subscribers to the video, video will not be encoded. Check if video is being encoded when
a subscriber is present.
4
Ensure Video Encoding is enabled on the node. You must click the Save & Reconfigure Unit button for
settings to take effect.
2
Ensure the correct Video Viewer URL is entered into your video viewer.
5
Ensure that the correct video input is selected on the Video Encoding Configuration page.
3
To Next Page
Loading...