© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
86
Reset Node to Factory Configuration
4
Configure Node Name and Management IP configuration (IP, Netmask, Gateway).
Keep Current Settings: Node Name, Management IP, Netmask, and Gateway will not
change after the node is reset to factory configuration.
Full Factory Reset: All settings will be reset to factory configuration.
5
When you are ready to remove all custom configuration and restore the node to factory set-
tings, click the Factory Reset button.
USING THE WEB MANAGEMENT INTERFACE: RESET TO FACTORY CONFIG
1
Click the Node Configura-
tion tab.
2
Click Config Management.
3
Click Factory Reset.
3
4
5
To Next Page
Loading...
Need help?
General
