Persistent Systems Wave Relay MPU5 - Configuring the Management Computer (Linux)

© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
48
1
Open the command line.
2
Type:
sudo ifcong eth0 10.4.1.10/24
Configuring the Management Computer (Linux)
3
Type:
sudo ip addr add 10.3.1.10/24 dev eth0
What Can I Do Now?
✓
▶ Configure computers to be able to communicate with Wave Relay
®
devices.
▶ Have a computer that is able to configure a Wave Relay
®
device.
SOFTWARE SETUP: MANAGEMENT COMPUTER