Persistent Systems Wave Relay MPU5 - Enable Push-To-Talk; Set Earpiece Volume

© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
131
DEVICE OPERATION: CONFIGURING PTT SETTINGS
Set Earpiece Volume
1
Next to Volume, check the Network De-
fault box to use the Network Default ear-
piece volume.
Enable Push-to-Talk
1
In the Run PTT Subsystem drop-down
menu, select Enabled.
2
To disable Push-to-Talk, select Disabled.
2
To customize earpiece volume, uncheck
the Network Default box.
3
In the Volume field, enter a value 0 - 125.
Values above 100 are digitally amplified.