© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
139
DEVICE OPERATION: CONFIGURING PTT SETTINGS
Using Flash Override
1
To activate Flash Override, “tap-tap-hold” the PTT button (press and release the PTT button
quickly in succession, then press and hold the PTT button for the duration of the transmis-
sion)
2
The transmitting user and all receiving users will hear three beeps.
3
Talk.
4
Release the PTT button when you are finished talking.
Flash Override is a feature that allows a user to transmit audio to all nodes on the network regard-
less of which channel they are operating on.
Flash Override audio will interrupt all audio on all channels.
To Next Page
Loading...