Persistent Systems Wave Relay MPU5 - Page 115

© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
115
DEVICE OPERATION: CONNECTING AN EUD OR HANDHELD DISPLAY
1
Connect CBL-DATA-2004
to the PTT/EUD side con-
nector on the MPU5.
2
Insert the Android™ EUD
into the Juggernaut Case.
3
4
Connect the 6-Pin Push
Pull connector on the
Juggernaut Case to the
6-Pin Push Pull connec-
tor on CBL-DATA-2004.
The MPU5 Android™ OS will be displayed on the EUD or Display.