EasyManua.ls Logo

Persistent Systems Wave Relay MPU5 - Exposure Limits and Regulatory Notes

Persistent Systems Wave Relay MPU5
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
145
PROFESSIONAL INSTALLER – COMPLIANCE
Minimum Safe Distance (MSD)
Antenna Gain (dBi)
*Occupational Expo-
sure Distance (cm)
Non Occupational Ex-
posure Distance (cm)
Dipole (Omnidirec-
tional)
2.1 7.0 20.0
3.5 7.0 20.0
4.0 8.0 20.0
7.4 **11.0 **25
In addressing the MSD for operation of the RF-2100 S-Band (2200 MHz – 2500 MHz) radio module with FCC ID
2AG3J-RF2100 and IC ID 20968-RF2100 and the RF-5100 Upper C-Band (5100 MHz – 6000 MHz) radio module with
FCC ID 2AG3J-RF5100 and IC ID 20968-RF5100, the applicable Maximum Permissible Exposure (MPE) limits were
obtained IAW the FCC rules for radio frequency radiation exposure limits under
FCC Title 47, Chapter 1 Subpart 1
Article 1.1310 and Industrial Canada RSS-102, Section 2.6
.
En abordant la MSD pour le fonctionnement des RF-2100 S-Band (2200 MHz - 2500 MHz) module radio avec FCC
ID 2AG3J-RF2100 et IC ID 20968-RF2100 et RF-5100 Upper C-Band (5100 MHz – 6000 MHz) avec FCC ID 2AG3J-
RF5100 et IC ID 20968-RF5100, l’exposition maximale admissible applicable (MPE) limites ont été obtenus con-
formément à la FCC règles pour les limites d’exposition aux radiations de fréquences radio sous FCC Titre 47,
Chapitre 1 partie 1 article 1,1310 et industriel Canada RSS-102, Section 2.6.
For compliance information, contact Persistent Systems’ Quality Management Department.
Pour plus d’informations de conformité, le service de qualité contact Persistent Systems.
(212)-561-5895
support@persistentsystems.com

Table of Contents

Other manuals for Persistent Systems Wave Relay MPU5