© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
37
PHYSICAL SETUP: SIDE CONNECTORS
4
5
Twist the thumbscrew clockwise to attach
the cable to the device.
Ensure that the cable is firmly attached and
the connector is sitting flush with the case.
Ensure that there are no foreign objects in the
thumbscrew or side connector.
4
Ensure that the cable connector is flush with the
case.
5
What do I do if the cable won’t mate
with the side connector?
?
Ensure that you are trying to connect the cable to
the correct side connector.
1
Ensure that you are aligning the key pin properly
and the cable is not upside down.
2
Ensure that no parts of the thumbscrew and the
side connector are bent or damaged.
3
To Next Page
Loading...