© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
71
TESTING CONNECTIVITY: NEIGHBOR NODE STATUS
3
Verify that all nodes are communicating with the network.
Notes:
▶ This table only displays Neighbor Nodes (nodes directly connected without hops through other nodes. If you
spread nodes apart, they may disappear from the Neighbor Nodes Status page when they become connected via a
hop.
▶ The Neighbor Nodes status page displays:
▶ Node Names
▶ IP Addresses
▶ Receive Signal-to-Noise Ratio (SNR) between nodes
To Next Page
Loading...