15-07-2002
Specific features of the colour
screen
'Trip computer' context menu
Briefly press the 'MODE' button to
select one of the following functions:
– Route 1,
– Route 2,
– Enter the distance to the destina-
tion (when guidance is not activat-
ed; otherwise the information is
given by the navigation),
– Change the units (°C or °F, km and
litres or miles and gallons).
Time elapsed since the last zero
re-set of the route
This is the time which has elapsed
since the last zero re-set of the route
displayed. The time is calculated,
depending on the circumstances, by
the number of 'hours' and 'minutes',
'days' and 'hours' or 'months' and
'days'.
Distance remaining to be travelled
This is the distance remaining to the
destination. It can either be calculat-
ed by the navigation if guidance is
activated, or entered by the user,
minus the distance covered since the
distance was entered.
At the start of the journey, the dis-
tance to be travelled is given by:
– the satellite navigation system, if
guidance has been activated,
– the user entering the distance to
the destination.
Note: if digits are missing, dashes
are displayed in their place.
YOUR 607 IN DETAIL
115
To Next Page
Loading...
