15-07-2002
5 -Visibility
programme
In certain cases, the
comfort programme
may prove inadequate
to demist or de-ice the
windows (humidity,
many passengers, ice).
☞ In this situation, select the visibili-
ty programme for rapid clearing of
the windows.
It manages the air conditioning and
the air flow and intake and distrib-
utes the ventilation towards the wind-
screen and the side windows.
The symbols 'A/C', 'AUTO' and air
flow (fan) are displayed.
Note: for your comfort, between two
starting operations the settings are
retained if the temperature of the
passenger compartment has not var-
ied a great deal. If it has, automatic
mode is used.
Manual adjustment
You may, if you wish, make a differ-
ent selection from the one offered by
the system, by manually modifying a
setting.
☞ Pressing the 'AUTO' driver or
passenger button enables you to
return to the corresponding auto-
matic operation.
6 - Adjustment of
the driver's air
distribution
7 - Adjustment of
the passenger's
air distribution
☞ Pressing the dri-
ver's or passen-
ger's button several
times in succession
allows you to position the air flow on
the driver's or passenger's side,
towards:
– the windscreen and the feet,
– the feet,
– the centre vent, the side vent
and the feet,
– the centre vent and the side
vent,
– the windscreen.
Note: when programme 5 (following
page) is being used, button 7 does
not operate; it causes temporary
flashing of the button 5 indicator
light.
8 -Air conditioning
(A/C) on/off
☞ Press this button
once to stop the air
conditioning.
The symbol 'A/C' goes out.
☞ Press this button again to return to
automatic air conditioning.
The symbol 'A/C' comes on.
YOUR 607 IN DETAIL
91
To Next Page
Loading...
