15-07-2002
YOUR 607 IN DETAIL
117
EXTERIOR MIRRORS
Adjustment from the inside
☞ Turn knob B to the right or to the
left to select the corresponding
mirror.
☞ Move knob B in all four directions
to adjust.
Folding back the mirrors electri-
cally
☞ With the ignition on, turn knob B to
position A.
or,
☞ Lock the vehicle using the remote
control.
Note: this function can be neu-
tralised. Contact your PEUGEOT
dealer.
When the vehicle is parked, the
exterior mirrors can be folded
back manually.
Automatically adjustable
mirrors for parking
These allow you to see the ground
(kerb, wall...) when carrying out park-
ing manoeuvres in reverse gear.
Tilting the mirror to the parking posi-
tion:
☞ switch on the direction indicator
on the parking side,
☞ engage reverse gear.
The exterior mirror corresponding
to the side on which you are park-
ing tilts downwards.
Returning the mirror to the previous
position:
☞ change out of reverse gear.
Note: to be active, this function must
be initialised by adjusting the mirror,
with reverse gear engaged and the
direction indicator on the side of the
mirror to be adjusted switched on.
Each remote control can memorise a
specific setting.
The driver's mirror is con-
vex in order to eliminate
the 'blind spot' (area at
edge defined by a dotted
line).
As a result, objects observed in
the driver's and passenger's mir-
rors are in reality closer than they
appear.
This must be taken into account
to judge correctly the distance of
vehicles approaching from
behind.
To Next Page
Loading...
