15-07-2002
PRACTICAL INFORMATION
144
CHANGING A BULB
Front lights
In the engine compartment, remove the style cover secured
by one or two butterfly screws, a plastic retainer clip and
two screws.
Note: handle the bulbs with a dry cloth.
1 - Dipped beam headlamps: H7-55W or Xenon bulb.
WARNING: RISK OF ELECTROCUTION
Xenon bulbs must be replaced by a PEUGEOT
dealer.
2 - Main beam headlamps: H1-55W.
☞ Turn the protective cover of the faulty bulb a quarter
of a turn and remove it.
☞ Disconnect the connector.
☞ Press the end of the securing clip to free it. Change
the bulb.
☞ When fitting the new bulb, ensure that the direction
notches are positioned correctly and the securing
clip is fixed properly.
☞ Reconnect the connector.
☞ Refit the protective cover.
The headlamps are fitted with polycarbonate glass with a
protective coating. Do not clean them with a dry or abra-
sive cloth, nor with a detergent or solvent product.
3 - Side lights: W 5 W.
☞ Pull the socket rearwards, remove the bulb and
change it.
4 - Direction indicators: PY 21 W (amber).
☞ Turn the bulb holder a quarter turn and remove it.
☞ Change the bulb.
☞ Refit the style cover.
Front foglamps: H1 - 55 W.
Note: In certain climatic conditions (low temperature,
humidity), condensation on the inside surface of the
headlamp glass is normal ; it disappears a few minutes
after the lights are switched on.
To Next Page
Loading...
