15-07-2002
Special features of alloy wheels
Bolt covers
Alloy wheel bolts are covered by
chrome trims.
Use tool 7 to remove the trims before
slackening the bolts.
Anti-theft bolts*
If your wheels are fitted with an anti-
theft bolt (one per wheel), the
chrome trim and then the plastic
cover must be removed using tool 7,
before unscrewing the bolt using one
of the two anti-theft sockets (which
were given to you on delivery of your
vehicle along with the duplicate keys
and the confidential card) and the
wheel brace 1.
Note: make a careful note of the
code number engraved on the head
of the anti-theft socket. This will
enable you to obtain duplicate anti-
theft sockets from a Peugeot dealer.
* According to model and destination.
PRACTICAL INFORMATION
143
Fitting the spare wheel
If your vehicle is fitted with a steel
spare wheel, when fitting it, it is nor-
mal to notice when tightening the
bolts that the washers do not come
into contact with the rim. The spare
wheel is secured by the cone-shape
of each bolt.
Fitting snow tyres
If you fit snow tyres mounted on steel
wheels to your vehicle, it is essential
to use special bolts available from
your PEUGEOT dealer.
To Next Page
Loading...
Need help?
General
