15-07-2002
The complete destination is displayed. Select the 'Vali-
date' function then press the dial.
Note: you can also change the destination or store it in one
of the two directories (see paragraph 'Storing an address
in a directory').
The last guidance criterion used is displayed.
Guidance begins automatically by retaining this criterion if
there is no action within 5 seconds or after validating the
'YES' function.
Follow the instructions.
If you wish to change the guidance criterion, select the
'NO' function, then press the dial.
Select a criterion from the list offered, then confirm (press
the dial). When the criterion of your choice is selected,
select the 'Validate' function, then press the dial.
Guidance begins, follow the instructions.
YOUR 607 IN DETAIL
76
To Next Page
Loading...
