Fig. 62 Individually
powered
machine on
power
benching
c. Individually Powered Machine on Power Benching
The Pfoff 3334 con be set up on existing power benching while being driven
by an individual motor. This arrangement (Fig. 62) is much more fovorable
than driving the machine from the line shaft. The special advantage of this
setup is that the
mochine
can be put out of operation, as may be required.
All that is required to drive a machine of this type is a short belt. Compared
with line shaft drive, this belt con be mounted more easily and will hardly
slip.
A tabletop provided with the necessary cutouts
and
boreholes can be obtain
ed from Pfoff at extra charge.
68
To Next Page
Loading...
Need help?
General
