Pfaff 3371-10 series User Manual

Input
61
Group
Gruppe
Parameter
Parameter
Description
Bedeutung
Setting
range
Set value
100
103
Software version control panel
The soft- and hardware version of the
control panel are displayed.
V.xxx/ H.xxx
200
201
Program number
The program number of the program
to be processed is selected.
50 - 99 50
202
Button hole model
The button hole model (number of
holes in the button) is selected.
2 - 4 2
203
Coordinates of the first hole
The coordinates of the hole are ente
-
red.
xx, yy
204
Coordinates of the second hole
xx, yy
205
Coordinates of the third hole
xx, yy
206
Coordinates of the fourth hole
xx, yy
207
Coordinates of the fifth hole
xx, yy
208
Coordinates of the sixth hole
xx, yy
209
Stitch positions
The number of stitch positions on one
edge are entered.
1 - 20 xx, yy
210
Stitch formation
The stitch formation depends on the
(0 – 3) type of button selected, see
Chapter 11.04 Free input of the seam
pattern (Teach in) of the instruction
manual.
Three-hole button:
0 = cycle, 1 = point, 2 = stitching
Four-hole button:
0 = normal, 1 = cycle, 2 = arrow, 3 = Z
0 - 2
(0 - 3)
0
211
Intermediate trimming
On four-hole buttons the thread can
be trimmed between the second and
third hole.
ON - OFF OFF
212 Number of sewing-on stitches
2 - 10
2
213 Number of attaching stitches
2 - 10
4

Pfaff 3371-10 series Specifications

General

Brand	Pfaff
Model	3371-10 series
Category	Sewing Machine
Language	English