Pfaff 467 User Manual

32. Correlating Top and Bottom Feeds
To ensure smooth feeding, the position of the vibrating presser should be adjusted in relation
to the feed dog with great care. This is particularly important if both these parts have long
tooth rows. A vibrating presser that engages the material with one or two teeth only may
damage delicate fabrics.
Eccentric stud Ez (Fig. 40) at the top of the top feed drive connecting link serves to adjust the
position of the vibrating presser in relation to the feed dog. To do this, loosen alien screw i
and turn eccentric stud Ez to the right or left with the aid of a screwdriver until the correct
setting is obtained.
The vibrating presser should be adjusted so that it engages the material consistently throughout
its feed stroke.
After the adjustment, tighten screw I securely.
Fig. 40
R 9375
33. Adjusting the Vibrating Presser in Sewing Direction
On subcl. -7 and similar machines, the vibrating presser should be adjusted in sewing direction
so that its needle hole is in line with that in the needle plate, and on subcl. -6/2 and similar
machines, so that the vibrating presser is centered in the frame-type shoe of the presser foot.
42
From the library of: Superior Sewing Machine & Supply LLC

Pfaff 467 Specifications

General

Brand	Pfaff
Model	467
Category	Sewing Machine
Language	English