Pfaff 467

z
Fig. 7 R 5870
7. Threading the Bobbin
Insert a full bobbin Into the bobbin case
so that the thread draws on the top from
the left toward the right (Fig. 5). Hold
the bobbin firmly in the bobbin case, pull
the thread into the slot (Fig. 6) and draw
it under the tension spring and into the
delivery eye (Fig. 7). Turn the bobbin
case so that the end of the latch points
toward you, and place it on the center
stud in the bobbin case base. Press against
the bobbin case until you hear it snap
into place. Failure to observe this pre
caution may result in bobbin case or
needle breakage.
From the library of: Superior Sewing Machine & Supply LLC