Pfaff 467 User Manual

Fig. 42
SE AW
-V"?*?-.-V
R 9159
Check to see that the feed dog makes no perceptible motion when you actuate reverse feed
control p. If adjustment is required, remove the gear case cover, loosen set screws 7 and 8
and rotate feed driving eccentric SE on shaft AW until the feed dog makes no perceptible
motion when you actuate reverse feed control p (with the needle bar set as instructed above).
After this adjustment, tighten set screws 7 and 8 securely again.
Feed lifting eccentric HE (Fig. 41 a) is set correctly if opening BO in its balancing collar is
positioned exactly perpendicularly
above the center of lower drive shaft AW when feed
driving eccentric SE is in the position described above.
To adjust, loosen set screws I and m and turn feed lifting eccentric HE on its shaft, as
appropriate.
45
From the library of: Superior Sewing Machine & Supply LLC

Pfaff 467 Specifications

General

Brand	Pfaff
Model	467
Category	Sewing Machine
Language	English