8.4.6 Linking program 1 with program 2 and program 2 with program 3:
6.1 Press the PM key, (LED on) and press the TE key, (LED on)
6.2 Press the paging key until the display Fig. 8.6 appears
6.3 Set program number "1" with the A+ / A- keys,
6.4 Press the paging key until the display Fig. 8.7 appears
6.5 Set program number "2" with the C+ / C- keys,
6.6 Press the TE key, (LED off), values are accepted!
6.7 Press the TE key, (LED on), entry mode
Program number Number of stitches (1-250)
for seam section 1
Seam section number
Fig. 8.6
Speed of sewing program Number of seam sectionsSubsequent program number
Fig. 8.7
p4xpd-2-en 8.10 08-08-2
9
To Next Page
Loading...
Need help?
General
