6.8 Press the paging key until the display Fig.8.8 appears
6.9 Set program number "2" with the A+ / A- keys,
6.10 Press the TE key, (LED off), values are accepted!
6.11 Press the TE key, (LED on), entry mode
6.12 Press the paging key until the display Fig. 8.9 appears
6.13 Set subsequent program number "3" with the C+ / C- keys,
6.14 Press the TE key, (LED off), values are accepted!
Program 1 is now linked with program 2 and program 2 is linked with program 3!
Speed of sewing program Number of seam sectionsSubsequent program number
Fig. 8.9
Program number
Number of stitches (1-250)
for seam section 1
Seam section number
Fig. 8.8
p4xpd-2-en 8.11 08-08-2
9
To Next Page
Loading...