8.4.7 Linking program 3 with program 1:
To ensure that the machine starts again with program 1 at the end of program 3, you have to link program 3 with
program 1!
7.1 Press the PM key, (LED on) and press the TE key, (LED on)
7.2 Press the paging key until the display Fig. 8.10 appears
7.3 Set program number "3" with the A+ / A- keys,
7.4 Press the TE key, (LED off), values are accepted!
7.5 Press the TE key, (LED on), entry mode
7.6 Press the paging key until the display Fig. 8.11 appears
7.7 Set subsequent program number "1" with the C+ / C- keys,
7.8 Press the TE key, (LED off), values are accepted!
Program 3 is now linked with program 1!
Program number Number of stitches (1-250)
for seam section 1
Seam section number
Fig. 8.10
Speed of sewing program Number of seam sectionsSubsequent program number
Fig. 8.11
p4xpd-2-en 8.12 08-08-2
9
To Next Page
Loading...
Need help?
General
