Revision: 3.0.3
(5)
Make sure that the Flowmeter is able to run properly with high reliability. The stronger the signal
strength displayed, the higher the Q value reached. The longer the Flowmeter runs accur
higher the reliability of the flow rates displayed. If there is interference from ambient electromagnetic
waves or the signal detected is too poor, the flow value displayed is not reliable; consequently, the
capability for reliable operation is
(6)
After the installation is complete, power on the instrument and check the result accordingly.
D116
Series Ultrasonic Flowmeter
Make sure that the Flowmeter is able to run properly with high reliability. The stronger the signal
strength displayed, the higher the Q value reached. The longer the Flowmeter runs accur
higher the reliability of the flow rates displayed. If there is interference from ambient electromagnetic
waves or the signal detected is too poor, the flow value displayed is not reliable; consequently, the
capability for reliable operation is
reduced.
After the installation is complete, power on the instrument and check the result accordingly.
Series Ultrasonic Flowmeter
Page 18 of 53
Make sure that the Flowmeter is able to run properly with high reliability. The stronger the signal
strength displayed, the higher the Q value reached. The longer the Flowmeter runs accur
ately, the
higher the reliability of the flow rates displayed. If there is interference from ambient electromagnetic
waves or the signal detected is too poor, the flow value displayed is not reliable; consequently, the
After the installation is complete, power on the instrument and check the result accordingly.
To Next Page
Loading...